E602-0006-- Firmware Error; E602-0007-- Firmware Error; E602-0008-- The Memory Area In The Main Controller Is Depleted; E602-0009-- Meap Cannot Be Started - Canon imageCLASS LBP325dn Service Manual

E602-0006--
Detection Description
Remedy
E602-0007--
Detection Description
Remedy
E602-0008--
Detection Description
Remedy
E602-0009--
Detection Description
Remedy
E602-1102--
Detection Description
Remedy
E602-1112--
Detection Description
Remedy
E602-1113--
Detection Description
Remedy
E602-1302--
Detection Description
Remedy
E602-1312--
Detection Description
Remedy
E602-1313--
Detection Description
Remedy
Firmware error
Loading of Subbootable ends in failure.
1. Turn OFF and then ON the power.
2. Replace the Main Controller PCB.
Firmware error
Damage on the internal file
1. Turn OFF and then ON the power.
2. Replace the Main Controller PCB.
The memory area in the Main Controller is depleted
Remaining memory area in the Main Controller is small.
* Turning OFF and then ON the main power stops the error code to be displayed, but the continuous
use causes the memory area in the Main Controller PCB to be completely used up or causes
symptoms such as machine freeze.
1. Replace the Main Controller PCB.
MEAP cannot be started.
MEAP cannot be started due to an error caused by invalid power down.
1. Select Function.gr > MEAP > MEAP FUNCTION = ON, and turn OFF and then ON the main
power.
* Since the installed MEAP application and its management information are all cleared after reboot,
MEAP needs to be reinstalled.
File system could not be initialized normally. (MEAP-related)
File system could not be initialized normally.
1. Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be
displayed in some cases, execute the remedy for E616-0001.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
Device access error (MEAP-related)
Device access error
1. Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be
displayed in some cases, execute the remedy for E616-0001.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
Device access error (MEAP-related)
Device access error
1. Turning OFF and then ON the main power executes auto recovery. Since E616-0001 may be
displayed in some cases, execute the remedy for E616-0001.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
File system could not be initialized normally.
File system could not be initialized normally.
1. Turning OFF and then ON the main power executes auto recovery.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
Device access error
Device access error
1. Turning OFF and then ON the main power executes auto recovery.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
Device access error
Device access error
1. Turning OFF and then ON the main power executes auto recovery.
* When this error occurs, the firmware downloaded by the CDS Updater will be lost.
201
8. Error/Jam/Alarm