Table of Contents
Advertisement
Service Mode > NETWORK GR.
EAPOL_WT
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
GCP-URLC
Detail
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
FTP MODE
Detail
Display/Adj/Set Range
Default Value
DHCP NACK SW
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
■ E-RDS
Service Mode > NETWORK GR. > E-RDS
E-RDS SWITCH
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Wait time setting for response to EAPOL packet
To set the wait time for response (or the next request) to EAPOL packet sent by the device.
1) Enter setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
10 to 120
Second
30
ON/OFF of connection destination setting for cloud print
To enable/disable the changing from remote UI of connection destination URL for cloud print.
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Can change the setting from Remote UI > Settings/Registration > Preferences > Network > Google
Cloud Print Settings > Edit Basic Settings > Connection Destination.
Off/On
On: Can change (display)
Off: Cannot change (hide)
Off
Default operation mode setting for FTP print
To set the default operation mode for FTP print. Switch between ASCII mode and BIN mode
according to user environment.
MODE0/MODE1
MODE0: ASCII mode
MODE1: BIN mode
MODE0
ON/OFF of retries at reception of DHCP NACK
To set the behavior upon receiving DHCP NACK.
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Off/On
Off: No retries
On; Retries
Off
ON/OFF of Embedded-RDS
To set the use/no use of Embedded-RDS function.
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Off/On
Off: Not use Embedded-RDS
On: Use Embedded-RDS
On: Except for China
Off: China
228
9. Service Mode
Advertisement
Table of Contents
Troubleshooting
