Removing The Low Voltage Power Supply Unit; Removing The High Voltage Power Supply Pcb - Canon imageCLASS LBP325dn Service Manual

Removing the Low Voltage Power Supply Unit

■ Preparation
1. "Removing the Rear Cover Unit" on page 127
2. Remove the cassette.
3. "Removing the Cartridge" on page 127
4. "Removing the Right Cover Unit" on page 129
5. "Removing the Left Cover" on page 133
6. "Removing the Controller Cover" on page 140
7. "Removing the Control Panel Unit" on page 150
8. "Removing the Upper Cover Unit" on page 136
9. "Removing the Controller Box" on page 144
■ Procedure
1. Free the harness from the guide, and remove the Power Supply Holder.
1x
1x
2. Remove the Low Voltage Power Supply Unit.
3x
1x
2x

Removing the High Voltage Power Supply PCB

■ Preparation
1. "Removing the Rear Cover Unit" on page 127
2. "Removing the Cartridge" on page 127
3. "Removing the Left Cover" on page 133
149
5. Parts Replacement and Cleaning
2x