Error Message List - Canon imageCLASS LBP325dn Service Manual

Error Message List

Error information displayed on the communication error log detail screen is shown below.
(The "server" described here means UGW.)
Code Character strings
0000 SUSPEND: mode changed.
0000
0500 SUSPEND: Communication test
0003 is not performed.
0xxx 0003 Server schedule is not exist
0xxx 0003 Communication test is not per-
formed
84xx 0003 E-RDS switch is setted OFF
8600 Event Registration is Failed
0002
8600
0003
8600
0101
8600
0201
8600
0305
8600
0306
8600
0401
8600
0403
8600
0414
8600
0415
8700 SRAM version unmatch!
0306
8700 SRAM AeRDS version unmatch! An invalid value has been entered at the
0306
8xxx 0004 Operation is not supported
8xxx 0101 Server response error ( NULL )
8xxx 0201 Server schedule is invalid
8xxx 0202
8xxx 0203
8xxx 0204
8xxx 0206
8xxx 0207 Internal Schedule is broken
8xxx 0208
8xxx 0221 Server specified list is too big
8xxx 0222 Server specified list is wrong
8xxx 0304 Device is busy, try later
Cause
Operation mode mismatch
E-RDS was enabled, but the main power of
the device was turned OFF and then ON
without performing a communication test.
The schedule does not exist.
Communication test has not been comple-
ted.
E-RDS is not enabled.
Processing in the device (event processing)
failed.
An invalid value has been entered at the
beginning of the NVMEM area of E-RDS
(nonvolatile memory area).
beginning of the NVMEM area of E-RDS
(nonvolatile memory area).
The user tried to execute a method which is
not supported by E-RDS.
UGW reply error: Processing of the UGW
error code failed.
The schedule specified by UGW is invalid. Report the detailed information at the time of
The internal schedule of E-RDS is invalid. Perform and complete a communication test
The information the UGW server instructed
to send for the alert code/alarm code filter
function is invalid.
The information the UGW server instructed
to send for the alert code/alarm code filter
function is invalid.
A semaphore consumption error occurred
during a communication test.
99
3. Technical Explanation (System)
Remedy
Execute initialization of the E-RDS settings
(CLEAR).
Perform and complete a communication test
(COM-TEST).
Perform and complete a communication test
(COM-TEST).
Perform and complete a communication test
(COM-TEST).
Set the value of the E-RDS setting (E-RDS
SWITCH) to ON, and perform a communi-
cation test (COM-TEST).
Turn OFF and then ON the power of the de-
vice. If the error occurs again after turning
OFF and then ON the power, replace the
system software of the device (version up-
grade).
Turn OFF and then ON the power of the de-
vice.
Turn OFF and then ON the power of the de-
vice.
Collect Debug log and contact the Support
Dept. of the sales company.
Perform and complete a communication test
(COM-TEST).
occurrence of the error to the Support Dept.
Perform a remedy on the UGW side, and
then perform a communication test again.
(COM-TEST).
There is a problem with the alarm filter set for
UGW. Contact the Support Dept. of the sales
company.
There is a problem with the alarm filter set for
UGW. Contact the Support Dept. of the sales
company.
Wait for a while and then perform a commu-
nication test again.