Dots And Horizontal Streaks Appear In The Paper Feeding Direction Periodically - Oki ES6450 User Manual

Dots and horizontal streaks appear in the paper feeding direction
periodically
Cause
If dots or streaks of a specific color
appear at intervals of about 75 mm,
the green tube of the image drum is
scratched or dirty.
If dots or streaks of various colors
appear at intervals of about 94 mm,
the fuser unit is scratched or dirty.
If the intervals are about 38 mm,
parts inside the belt unit are
broken.
If the intervals are about 34 mm or
43 mm, parts in the image drum
are damaged.
If the intervals are about 30 mm,
there are foreign objects in the
image drum.
If the intervals are about 31 mm,
the resist roller is dirty.
The image drum has been exposed
to light.
Dirt has deposited on the paper
transfer path.
Please replace the image drum.
Replace the fuser unit.
Replace the belt unit.
Please replace the image drum.
Open and close the front cover and print again.
If the problem persists, replace the image drum.
Open the front cover and wipe the resist roller with soft
tissue paper.
Install the image drum back to the printer, and leave the
printer idle for a few hours. If the problem persists, replace
the image drum.
Test print a few pages.
- 368 -
Solution
Troubleshooting
Reference
Replacing the
image
drum(P.303)
Replacing the
fuser unit(P.310)
Replacing the belt
unit(P.308)
Replacing the
image
drum(P.303)
Replacing the
image
drum(P.303)
Cleaning the
resist
roller(P.320)
Replacing the
image
drum(P.303)
Printing the menu
map
(configuration)(P.
86)