Oki ES6450 User Manual page 112

Narrow Paper Speed
Quiet Mode
Ultra Light Paper Care Mode
Low Coverage Mode
Low Temp. Mode
*1 Factory default setting values are different according to the country or region.
Item
Changing settings from the operator panel
Factory
default
settings
Mode1 Sets the printing speed when narrow paper
is used.
The target paper weight ranges from Ultra
Light to Medium.
Mode1:
The recommend mode for massive printing
on narrow paper (with a width of 182 mm or
less).
Switches the speed to a low speed when
printing on narrow paper.
Mode2:
The recommend mode for printing on a
small amount of narrow paper. Prints on
narrow paper without reducing the speed.
When printing on a large amount of narrow
paper, it is easier to begin the waiting time
for fixing temperature adjustment.
Mode3:
To print on wide paper after printing a large
amount of narrow paper, poor printing may
occur at the edge of paper. In this case, this
mode is recommended to reduce the poor
printing.
To start printing on wide paper after printing
on narrow paper, the waiting time for fixing
temperature adjustment may be available.
Switches the speed to a low speed when
printing on narrow paper.
Off Sets the quiet print mode to reduce the noise
during printing. The print speed becomes
lower when [On] is set.
Off If the following phenomena occur when you
are printing with [Media Weight] set to [Ultra
Light] or [Light], setting it to [On] may
improve the situation. But, the printing speed
becomes lower.
 Thin stripes appear along the paper
travel direction.
 An after-image is printed on either the
top, bottom, left or right side of
light-colored texts or images, about 94
mm apart.
Off When used in a hot and humid environment,
setting this when vertical band or vertical
streaks-like blur appear on the edges of the
paper may improve the print result.
Off Set to idle the drum and belt so that they
operate stably when color registration is
noticeable in a low temperature
environment.
When it is turned [On], the remaining service
life of the image drum will be shortened.
- 112 -
Description