How to use levers L1 and L2
When the front cover is open, you will find the L1 lever and the L2 lever. This section describe how to use these
levers.
Lever L1
Used to replace the image drum and to clean the LED head.
Replacing the image
Cleaning the LED
head(P.312)
After opening the front cover, operate the L1 lever first and then the L2 lever.
After the operation, only the output tray is raised.
No.
1
Output tray
2
Image drum basket
When closing, close the output tray first. Then, press the L1 lever, and close the front cover with your both
hands firmly.
drum(P.303)
Name
- 88 -
Basic operations