Oki ES6450 User Manual page 222

Item
SSL/TLS
IPSec
WebPage Authentication
Method
Maintenance Reset/Restore
Network Scale
Print From USB Memory Setup
Sets printing from the USB memory.
Item
Default Settings
Barcode Print Setup
Print Setup
Item
Print Menu Print Setup
Printer Adjust
Print Position Adjust
Drum Cleaning
Hex Dump
Color Menu
System Configuration Menu
Emulation PCL Setup
PS Setup
IBM 5577 Setup
Private Print Verify job option
Setup
Erase job option
Keep job for
Encrypts communication between this machine and your PC (client).
Sets the encryption and tampering of communication between this
machine and your PC (client).
Sets the web page authentication method.
Initializes or resets the network card. If it is reset, the web page will not
be displayed even if you access from the web browser until you have
reset. If it is initialized, the IP address will be reset to the initial state, and
the information set manually will be lost. In that case, you will not be able
to view the web page.
This setting is to operate more efficiently on the network. When using a
hub with a spanning tree function, this function is effective when the PC
and this machine are connected on a one-to-one basis with a crossover
cable.
Sets the default value for printing from the USB memory.
Sets the initial value for printing barcodes.
Sets the number of copies, etc. Upon using the printer driver, the setup
in the printer driver will take priority over this setting value.
Sets the printer adjustment such as manual timeout and jam recovery.
Adjusts the print position such as X Adjust, Y Adjust, Duplex X Adjust,
and Duplex Y Adjust.
Sets the image drum cleaning.
Displays all received print data in hexadecimal. This mode exits when
this machine is restarted.
Sets the information about color.
Sets various types of actions of this machine in correspondence to
various situations such as personality and alarm release.
Sets the information about PCL.
Sets the information about PS.
Sets the information about IBM 5577.
Specifies whether to verify the print data before printing.
If enabled, printing is performed after verifying that the print data has not
been changed. The integrity of print data is guaranteed, but the time to
start printing will be longer.
Sets the method for erasing the print data.
Specifies that the data cannot be overwritten after it has been erased
and cannot be restored.
If you overwrite, it will take longer to erase.
Value range: No overwrite/Zero out once
Sets the retention period of the print data.
After the print data is saved, if the print data is not printed after the set
period, the print data is automatically deleted.
Value range: 15 min, 30 min, 1 hour, 2 hours, 4 hours, 8 hours, 12
hours, 1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days
- 222 -
Management of this machine
Description
Description
Description