Menu List - Oki ES6450 User Manual

Menu list

You can print to check the menu list.
Printing the menu map
 The following items are displayed when the wireless LAN module (optional) is installed.
AirPrint
Wireless(Infrastructure) Setting
Wireless(AP Mode) Setting
Print From USB Memory
Item
Select Print
File
Print Setup Paper Feed
Copies
Duplex
Binding
Fit
Color Mode
Barcode Print Repeat
Setup
Layout Rows
Layout Columns
Start Position X Coordinate 5 millimeter
Spacing
Barcode Type
Barcode
Attribute
*1 Factory default setting values are different according to the country or region.
(configuration)(P.86)
Factory
default
settings
Tray 1 (xx)
1
On or Off
Long Edge
On
Color
1
1
1
Y Coordinate 30 millimeter
X Spacing 5 millimeter
Y Spacing 5 millimeter
QR Code
Error Low
Correction
Level
Module Size 10 x 1.7 mils
Human None
Readable
Character
Bar Height 29 pixels
Bar Width 8 x 1.7 mils
Changing settings from the operator panel
Select the file to be printed.
Specifies the paper feeding tray.
(xx) is the size of the paper loaded in this tray.
Sets the number of copies to be printed.
Sets whether or not to implement duplex printing.
*1
Sets the binding method for duplex printing.
Specifies whether to fit to the paper.
Selects whether to print in color or mono.
Sets the number of copies to be printed.
Sets the number of rows on each page.
Sets the number of columns on each page.
Sets the X coordinate of the start position (i.e. the direction
perpendicular to the paper travel direction).
Sets the Y coordinate of the start position (i.e. the direction
parallel to the paper travel direction).
Sets the X spacing of the scheduled printing range of
barcode.
Sets the Y spacing of the scheduled printing range of
barcode.
Sets the type of barcode.
Sets the error correction level of QR Code.
Sets the module size of QR Code
Sets the attributes of 1D barcode.
Sets the bar height.
Sets the bar width.
- 102 -
Description