Condensation occurs on printed paper
Cause
The paper is moist.
This machine is used in a place
with high humidity or sudden
changes in temperature and
humidity.
The edge of the paper is wet.
Streaks appear in the vertical direction
Cause
The toner is low.
The image drum is scratched.
Paper guide is misaligned.
Use the paper stored at appropriate temperature and
humidity.
Use this machine in an environment with an appropriate
temperature and humidity.
Press the scroll buttons on the operator panel several times
to select [Menus] - [Print Adjust] - [Moisture Control], and
change the setting. This setting may delay the completion of
printing the first page.
"Toner Low." or "Toner Empty. Replace with a new toner
cartridge." is displayed, replace the toner cartridge.
Please replace the image drum.
Check the position of the paper guide in the paper tray.
- 367 -
Solution
Solution
Troubleshooting
Reference
Storing
paper(P.83)
Installation
environment(P.16
)
-
Reference
Replacing the
black(K) toner
cartridge and the
waste toner
box(P.298)
Replacing the
toner cartridge
(C/M/Y)(P.301)
Replacing the
image
drum(P.303)
Loading
paper(P.72)