Table of Contents
Advertisement
S
P
ETTING
RINTER
The printer has an internal MENU containing a number of default
conditions that can be set to enable your printer to match the
parameters required by your computer.
E
NTERING THE
1.
Power on the printer while holding down the SELECT
button. The 12 and UTILITY LEDs will flash.
2.
Press the SELECT button to print the complete menu. This
will detail the current default settings.
3.
Press the LINE FEED button to select the relevant group
that needs to be changed (the group is the left-hand column
on the MENU printout).
4.
Press the FORM FEED button to select the relevant item
within the selected group (the Item is the centre column on
the MENU printout).
5.
Press the TOF SET button to cycle through the settings
available for the item you want to change (the settings are
the right-hand column on the MENU printout).
6.
Once you have reached the setting that you want, press
either the LINE FEED button (for the next group) or the
FORM FEED button (for the next item) to be changed.
Follow steps to 3 to 5 until all your required settings have
been changed.
7.
On completion of the changes, press the PITCH and MODE
buttons together to exit and save all the changes you have
made.
NOTE
Important, do not exit the menu mode by switching off the printer, as
this will not save any changes you have made.
D
EFAULTS
MENU
MODE
OPERATING YOUR PRINTER > 29
Advertisement
Table of Contents
