Alarm In/Control Terminal - Panasonic WJ-RT416 Installation Manual

ALARM IN/CONTROL terminal

Pin No.
q Alarm input CH1
w
Alarm input CH2
e
Alarm input CH3
r
Alarm input CH4
t
Alarm input CH5
y Alarm input CH6
u
Alarm input CH7
i
Alarm input CH8
o
Alarm input CH9
!0 Alarm input CH10
!1 Alarm input CH11
!2
Alarm input CH12
!3
Alarm input CH13
!4
Alarm input CH14
!5 Alarm input CH15
!6
Alarm input CH16
!7
Time adjust input
!8
Error output
!9
HDD error output
@0 - @4 (Signal GND)
@5
(N.C.)
50
Signal
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
The clock of the recorder will be set to
00 (min) by signal input. (Time correc-
tion range: ±15 minutes)
Signal output upon an error detection
(Thermal error (47 °C {117 °F} or high-
er), fan error, video loss, password
entry failure (3 times straight incorrect
password entry), no HDD detection)
Signal output upon a HDD error detec-
tion
Not available
!3 q
ALARM IN/CONTOROL
@5
!4
Operation Remark
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Open collector output, 100 mA or less,
24 V DC max.
Open collector output, 100 mA or less,
24 V DC max.