Dip Switch Setting - Panasonic WJ-RT416 Installation Manual

Add the recorder to a broadband WAN (Wide Area Network)
SEQUENCE
HDD
1
1
ERROR
2
ALARM MULTI
5
SCREEN
3
TIMER
4
9
5
ALARM
RESET
OPERATE
6 13
Server port: 2000 (editable)
PC
Important:
When the recorder is in a WAN, maximum accessible number will become as follows.
Operation
Monitoring of live images
Playback of recorded images
Frame display
Download of recorded images
Audio transmission/reception
* "Accessible number" is the number of the camera channels that can be displayed in the display area of the monitoring
software.
• It is necessary to log in first to play/download recorded images and transmit/receive audio.
• If live images are transmitted using Multicast, the chart above is not applicable.
• Only "Manager1" is capable of voice call. ( page 67)
• When displaying images from 5 or more camera channels, or when displaying recorded images in an area on a
multi-screen, only I-frame* will be displayed in all areas on a multi-screen and audio may not be heard.
*: Short for intra frame. I-frame is an image that is to be inserted in the intra refresh period of MPEG images.

DIP Switch Setting

When the unit is used together with the PS·Data devices, use the RS485 cable provided with the system controller.
In this case, it is necessary to terminate both devices on both ends of the connection if they are connected with the RS485
cable.
Termination of this unit can be set with the DIP termination switch on the rear panel, and the setting of the mode selection DIP
switch varies whether to use this unit as a receiver or a system controller.
When connecting to the system controller and this unit is connected as the end of the PS·Data connection, set mode selection
DIP switch 2 to "ON".
When connecting to the system device and this unit is connected as the end of the PS·Data connection, set mode selection
DIP switch 1 to "ON".
SEARCH STOP PLAY PAUSE REC REC STOP
2 3 4
SETUP COPY
6 7 8 REV FWD SKIP
– +
10/0 11 12
ESC
SET
14 15 16
Digital Disk Recorder WJ-RT416
Broadband router B (WAN → PC)
UDP port: 999 (fixed)
Accessible number*
Total of 16 areas
Total of 4 areas
4 PCs (4 users)
4 PCs (4 users)
1 PC (1 user)
Broadband router A (WAN → WJ-RT416)
TCP/UDP port: 2000 (configured on the WJ-RT416)
WAN
47