Panasonic WJ-NT104 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. DVR
  5. WJ-NT104
  6. Operating instructions manual
Panasonic WJ-NT104 Operating Instructions Manual

Panasonic WJ-NT104 Operating Instructions Manual

Network interface unit
Hide thumbs Also See for WJ-NT104:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Instructions Manual
Network Interface Unit

Operating Instructions

WJ-NT104
Model No.
O P E R A T
E
LIN K
RC V XM T
N e tw o rk
In te rf a c e
U n it W J -N
T 1 0 4
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WJ-NT104

Summary of Contents for Panasonic WJ-NT104

  • Page 1: Operating Instructions

    Network Interface Unit Operating Instructions WJ-NT104 Model No. O P E R A T LIN K RC V XM T N e tw o rk In te rf a c e U n it W J -N T 1 0 4 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

  • Page 2: Table Of Contents

    INSTALLATIONS ................................... 7 Mounting in the Rack ................................7 PREPARATIONS .................................... 9 LAN Type Connection ................................9 WJ-NT104 Setup ..................................12 MAIN PAGE AND CONTROLS ..............................13 Main Page and Control Windows ............................13 Operation Modes ................................... 14 MAIN PAGE (without Camera Control) ..........................16 TROUBLESHOOTING ..................................

  • Page 3: Preface

    Interface unit can control the pan/tilt head and lens of Use of the optional WV-Q204/2 mounting brackets per- the connected cameras. mits mounting up to two WJ-NT104 units in a rack side • Records and transmits images before and after an by side.

  • Page 4: Precautions

    PRECAUTIONS • Refer all work related to the installation of this prod- • Do not use strong or abrasive detergents when uct to qualified service personnel or system cleaning the appliance body. installers. Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent •...

  • Page 5: Major Operating Controls And Their Functions

    10BASE-T !6 !7 q Operate indicator [OPERATE] t Front panel Is on while the power of the WJ-NT104 is turned on. y Reset button [RESET] w Link indicator [LINK] Used to set or change a mode, or to restart. Lights when the unit is connected to a normally operat- u RS-232C port [RS232] ing network.
  • Page 6 ON selects the front panel port. To return the HTML file, JPEG or other image data stored in the WJ-NT104 to the factory default set- tings. The IP address and other setup data will not be initialized.

  • Page 7: Installations

    1. Remove the four rubber feet by removing the four screws from the bottom of the WJ-NT104. Rubber feet Mounting one WJ-NT104 with the WV-Q204/1 2. Fix the mounting brackets (large and small) on both sides of the WJ-NT104 with the eight supplied screws (M3x8) as shown below. Rack mounting...
  • Page 8 3. Install the WJ-NT104 with the rack mounting brackets in Mounting two WJ-NT104s the rack by using four screws (not included). Cautions: • Do not block the ventilation opening or slots in the cover to prevent the appliance from overheating.

  • Page 9: Preparations

    10Base-T cable LAN Type Connection The figure below shows how the WJ-NT104 can be connected directly to a PC for testing before it is connected directly to a network. The connection can also be made via a hub. Direct Connection to a PC without Hub Connect the 10Base-T port on the PC to the Ethernet port on the WJ-NT104 with a crossover cable.
  • Page 10 PC Setup The factory default settings of the WJ-NT104 are as fol- lows: IP address 192.168.0.10 Netmask 255.255.255.0 Default gateway 192.168.0.1 For a client PC to access WJ-NT104 factory default set- tings, set the IP address of the PC to 192.168.0.XX (XX means any number from 2 to 254 except 10).
  • Page 11 The browser displays the MAIN PAGE of the WJ- NT104's home page. If there is a camera input, it also displays the camera image. y Click [button] on the home page and verify the func- tions of the WJ-NT104.

  • Page 12: Wj-Nt104 Setup

    WJ-NT104 Setup First, it is necessary to set an IP address for the WJ-NT104 according to the operating environment. Consult your network administrator for the address to set. IP Address Setting via LAN Connection q On the Location bar, enter http://192.168.0.10/hwset- If the PC is running Windows95 or Windows98, select up.html to display the ADMINISTRATOR SETUP...

  • Page 13: Main Page And Controls

    MAIN PAGE AND CONTROLS Main Page and Control Windows On the Location bar of the PC, type http://192.168.0.10 (or IP address set for WJ-NT104) to display the MAIN PAGE default window. The MAIN PAGE window is available in the following five modes: 1.

  • Page 14: Operation Modes

    • Unless a user changes channels, the last selected channel is used to continue transmission. A change of channel by one user causes the channels of the other users connected to the WJ-NT104 to be switched to that same channel. This means that the monitored picture may suddenly change to another.

  • Page 15: Sequence Mode

    CAMERA OPERATE LINK RCV XMT Network Interface Unit WJ-NT104 Sequence Mode • This is an applied version of Random Input Selection Mode, used to change channels at specified intervals. Pan/tilt, zoom, and other camera functions cannot be controlled in this mode.

  • Page 16: Main Page (Without Camera Control)

    INPUT SELECT These buttons are used to switch the images of up to four cameras. A change of channel by one user causes the channels of the other users connected to the WJ-NT104 to be switched to that same channel.

  • Page 17: Troubleshooting

    NT104 is connected? WJ-NT104 and client PC connected to the same subnet: • Are the IP addresses of the WJ-NT104 and the client PC set for the same subnet? • Is the browser set to [Use proxy server]? When accessing an NT104 on the same subnet, it is recommended to select [Do not use proxy server] for the IP address.

  • Page 18: Instruments To Be Connected

    Internet Explorer Ver. 4.0 or higher CCTV Camera (option) Device Available image modes Outline Recommend: Panasonic-made Camera capable of image output in compli- CCTV camera ance with the NTSC standard. WV-CS604, WV-CS654 Coaxial communication type. Both pan/tilt head control and lens control can be used via Combination camera LAN from a remote PC.

  • Page 19: Specifications

    SPECIFICATIONS General Power Source: 12 V DC, 800 mA Ambient Operating Temperature: –10°C - +50°C (14°F - 122°F) Ambient Operating Humidity: Less than 90 % Dimensions: 210 (W) x 44 (H) x 350 (D) mm 8-1/4” (W) x 1-3/4” (H) x 13-3/4” (D) 2.3 kg (5.1 lbs.) Weight: Input and Output...
  • Page 20 5770 Ambler Drive, Mississauga, A Division of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Panasonic Sales Company Regional Offices: Division of Matsushita Electric of Puerto Rico Inc.

Table of Contents