Rack Mounting - Panasonic WJ-RT416 Installation Manual

Rack mounting

Use an EIA-standard 19" rack (depth: 550 mm or more).
Note:
It is necessary to procure four optional rack mount screws (W2-MSS/5008 or M5 x12).
z
Remove the five rubber feet from the bottom of
the recorder using a flathead screwdriver.
x
Place the provided rack mounting brackets on
both sides of the recorder and tighten with the
eight provided screws.
c
Install the recorder with the rack mounting
brackets in the rack by using four rack mounting
screws.
Important:
• Keep the temperature in the rack below +45 °C {113 °F}.
• Install the recorder in the rack as low as possible, and make a space of 1 unit (44 mm, 1.73") between the recorder and the
other mounted appliances.
• Do not block the front side of the rack such as by attaching a door panel, etc.
• It is recommended to install cooling fans or equivalent equipment to keep the temperature in the rack below +30 °C {86 °F}.
Rack mount bracket fixing screw (provided)
Rack mount bracket (provided)
Rack mounting screw: M5 x12 (locally procured)
Remove the rubber feet.
41