Display Images From The Cameras Sequentially (Sequential Display) - Panasonic WJ-RT416 Installation Manual

Display images from the cameras sequentially (sequential display)

It is possible to sequentially display images from cameras automatically. Images from the cameras will be displayed sequen-
tially according to the settings configured in advance.
The sequential display can be carried out on a single screen or a 4-split screen.
Sequential display on a single screen
z
Make sure that images are displayed not on a 4-split screen, and then press the [SEQUENCE] button.
• The sequential display will start and the
• To stop the sequential display, press the [SEQUENCE] button again.
Sequential display on a 4-split screen
z
Make sure that images are displayed on a 4-split screen, and then press the [SEQUENCE] button.
• The sequential display will start and the
• To stop the sequential display, press the [SEQUENCE] button again.
Notes:
• The dwell time (interval of switching from a camera channel to the next camera channel) can be configured on the setup
menu ("Display Setup" – "Sequence Dwell") ( page 61).
• It Is impossible to carry out the sequential display during playback.
• The sequence step that is unavailable to display (such as when no video signal) will be skipped.
20
icon (sequential display icon) will be displayed.
icon (sequential display icon) will be displayed.