Start/Stop Of The Manual Recording Using This Software (Manual Rec. Control); Determination Whether To Enable Or Disable The Alarm Output From The Audio In/Alarm Out Terminal On The Rear Of The Recorder (Alarm Output Control) - Panasonic WJ-RT416 Operating Instructions Manual

Monitoring software digital disk recorder

Hide thumbs Also See for WJ-RT416:

Table of Contents

Start/stop of the manual recording using this software (Manual Rec. Control)

It is possible to start and stop the manual recording using this software.

Screenshot 1

Select "Manual Rec. Control" ( page 34) from the pop-

up menu.

→ The "Manual Rec. Control" window will be displayed.

Determination whether to enable or disable the alarm output from the AUDIO

IN/ALARM OUT terminal on the rear of the recorder (Alarm Output Control)

It is possible to determine whether to enable or disable the alarm output from the AUDIO IN/ALARM OUT terminal

on the rear of the recorder.

Screenshot 1

Select "Alarm Output Control" ( page 34) from the

pop-up menu.

→ The "Alarm Output Control" window will be displayed.

Step 1

Select "On" or "Off" to start or stop the manual record-

ing.

On: Starts the manual recording using this software.

Off: Stops the manual recording using this software.

Step 2

Click the [Apply] button.

→ The selected operation will be carried out.

Step 1

Check the desired checkbox respective to the terminal

from which the alarm output signal is to be output.

Uncheck the checkbox to stop outputting the alarm out-

put signal.

Step 2

To close from the "Alarm Output Control" window, click

the [×] button at the right top of the window.

Table of Contents