Ethernet Link Object (Class Id: F6 Hex - Omron CK3M Seres Hardware User Manual

Attrib-
ute ID Parameter name
(hex)
04 Physical Link Object
05 Interface Configuration
06 Host Name
08 TTL Value
09 Mcast Config
0D Encapsulation Inactivity
Timeout
A-7-4

Ethernet Link Object (Class ID: F6 Hex)

The Ethernet link object is intended to retrieve various information on the Ethernet link.
Service Code
Service code
(hex)
01
0E
4C
Class ID and Instance ID
The class ID and instance ID are as shown below.
ID Type Value (hex)
Class ID F6
CK3M/CK5M Series Programmable Multi-Axis Controller Hardware User's Manual (O036)
Path to the physical link ob-
ject
Path Size Path size
Path Fixed path
Interface configuration
IP Address IP address
Network Mask Subnet mask
Gateway Ad- Default gateway
dress
Name Server Primary name server
Name Server 2 Secondary name server
Domain Name Domain name
Host name
TTL value
Multicast configuration
Alloc Control Multicast address allocation
method
Reserved Reserved
Num Mcast Number of multicast ad-
dresses
Mcast Start Addr Start multicast addresses
Encapsulation inactivity
timeout time
Parameter name
Get_Attribute_All Reads the values of all attributes.
Get_Attribute_Single Reads the value of the specified attribute.
Get_and_Clear Specifies attribute 4, 5, 12, or 13 and re-
sets the attribute to 0.
Attrib-
Description
ute
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
Read
and
write
Description
Appendices
Data type Value (hex)
Struct ---
UINT 0002 (always)
Padded 20F62401 (al-
EPATH ways)
Struct ---
UDINT Set value
UDINT Set value
UDINT Set value
UDINT Set value
UDINT Set value
STRING Set value
STRING Set value
UINT 01 (always)
Struct ---
USINT 00 (always)
USINT 00 (always)
UINT 01 (always)
UDINT Set value
UINT Set value (120
seconds by de-
fault)
Supported services
Classes Instances
Supported Supported
Supported Supported
Not supported Supported
A
A-17