2
Leave the flat-blade screwdriver pressed into the release hole and pull out the wire.
3
Remove the flat-blade screwdriver from the release hole.
Precautions for Safe Use
• Make sure that all wiring is correct.
• Do not bend the cable forcibly. Doing so may break the cable.
5-2-4
USB Memory Device Connection
Connect a USB memory device to the USB host port (Type A) on the CPU Unit to save relevant data.
Refer to 3-1-5 USB Memory Device on page 3-9 for information on the recommended USB memory
devices.
CK3M/CK5M Series Programmable Multi-Axis Controller Hardware User's Manual (O036)
1
Wire
Flat-blade screwdriver
2
3
5 Wiring
5
5-17