Selecting A Far-Site Camera - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Selecting a Far-Site Camera

200
2. Use the left or right arrow keys on the remote control to
highlight a video source. Then press the SELECT button on the
remote control.
-or-
After pressing the NEAR button twice on the remote control,
press button 1, 2, 3, or 4 to jump to a specific camera.
Make sure that the camera icons are displayed on screen.
Otherwise, when you press the number button, a camera preset
will be selected instead of a different camera source.
3. The ViewStation FX or VS4000 displays full screen the camera's
current view on the television monitor. A Camera icon appears
in the upper right corner pointing towards you.
To select a far-site camera source during a call:
1. Press the FAR button twice on the remote control. A series of
cameras pointing away from you (towards the far site) appears.
2. Press the left or right arrow key on the remote control to
highlight a video source. Then press the SELECT button on the
remote control.
-or-
After pressing the FAR button twice, press button 1, 2, 3, 4, or 5
to jump to a specific camera.
3. Press the SELECT button on the remote control.
4. The ViewStation FX or VS4000 displays full screen the far-site
camera's current view on the television monitor. A Camera icon
appears in the upper right corner pointing away from you.
Note
www.polycom.com