Additional Information - Polycom ViewStation FX4000 User Manual

Additional Information

© Polycom, Inc. 2002
sure the Primary Call Type Choice option on the Advanced
Address Book Preferences screen (Admin Setup > LAN/H.323
> Global Address > Preferences > Advanced Preferences) is
configured to be Manual. Every time an additional call is
added, the user is prompted with the message "dialing IP or
ISDN". If the selected entry is not a OneDial number, the
Primary Call Type does not affect how calls are made. For more
information about how to place this type of call, refer to
the Address Book, on page
Using a combination of Manual Dialer and Global Address
Book. Establish the first call, then add a second and a third call
using the Manual Dialer and the Global Address Book. For more
information about how to place this type of call, refer to
the Manual Dialer and the Address Book, on page
Through Dial-In Calling. A mixed protocol call can also be
created if the user is already in a point-to-point call (IP or ISDN)
and the user receives an incoming call that uses the other
protocol (IP or ISDN). For more information about the Dial-In
Calling feature, refer to the following section
page 237.
Supported ViewStation FX and VS4000 Functionality
Dual streams functionality when using Visual Concert FX is
supported in mixed protocol calls.
Downspeeding calls, either H.323 or H.320, to allow another
endpoint to be added is supported for mixed calls with systems
that are capable of downspeeding.
Powerpoint presentations, snapshots, PolycomSnap, and
interoperability with Visual Concert PC are supported in mixed
protocol calls.
Far-end camera control is supported in presentation or
full-screen mode with Polycom endpoints in mixed protocol
calls.
Chapter 6 - Using Advanced System Features
223.
Dial-In Calling, on
Using
Using
224.
225