Customizing Your Workspace; Allowing The Far Site To Control Your Camera; Displaying The Far Site's Name When The Call Connects - Polycom HDX Series User Manual

User's Guide for Polycom HDX Room Systems

Customizing Your Workspace

Allowing the Far Site to Control Your Camera

Displaying the Far Site's Name When the Call Connects

32
You can customize what you see on the screen, depending on how your
system is configured.
Depending on your system configuration, you can allow the far site to control
your camera. Far-site participants can also set and use presets for your camera,
if their system supports this.
To allow the far site to control your camera:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Scroll to Far Control of Near Camera and press
4. Press Home to save your change and return to the home screen.
Changing this setting takes effect immediately, even if a call is in progress.
Depending on your system configuration, you can specify whether to display
the far site's name when the call connects and how long to leave the name on
the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to Far Site Name Display Time, press
and select to display the far site's name during the entire call, for a
specified time, or not at all.
5. Press Home to save your change and return to the home screen.
to enable the option.
on the remote control,
© Polycom, Inc.