Customizing Your Workspace; Allowing The Far Site To Control Your Camera; Displaying The Far Site's Name When The Call Connects - Polycom VSX Series Getting Started Manual

Customizing Your Workspace

Allowing the Far Site to Control Your Camera

Displaying the Far Site's Name When the Call Connects

© Polycom, Inc.
You can customize what you see on the screen, depending on how your
system is configured. You can change these options before you place a call
and when the system is in a call.
Depending on your system configuration, you can allow the far site to control
your camera. This enables the other participants to adjust what they see.
Far-site participants can also set and use presets for your camera, if their
system supports this.
To allow the far site to control your camera:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Scroll to Far Control of Near Camera and press
option.
4. Press Home to save your change and return to the home screen.
Changing this setting takes effect immediately, even if a call is in progress.
Depending on your system configuration, you can specify whether to display
the far site's name when the call connects and how long to leave the name on
the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to Far Site Name Display Time, press
control, and select to display the far site's name during the entire call,
for a specified time, or not at all.
5. Press Home to save your change and return to the home screen.
C Y W
USTOMIZING OUR ORKSPACE
to enable the
on the remote
21