Customizing Your Workspace; Allowing The Far Site To Control Your Camera; Displaying The Far Site's Name When The Call Connects - Polycom HDX Series User Manual

Customizing Your Workspace

Allowing the Far Site to Control Your Camera

Displaying the Far Site's Name When the Call Connects

© Polycom, Inc.
4. Press Select again. The call becomes an audio-only conference with
all of the systems. If the system that dialed the flash hook hangs up, the
other systems will be connected in a call with audio and video, if the
capabilities are present.
You can customize what you see on the screen, depending on how your
system is configured.
If your system administrator has allowed access to user settings, you can allow
the far site to control your camera. Far-site participants can also set and use
presets for your camera, if their system supports this.
To allow the far site to control your camera:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Scroll to Far Control of Near Camera and press
4. Press Home to save your change and return to the home screen.
Changing this setting takes effect immediately, even if a call is in progress.
If your system administrator has allowed access to user settings, you can
specify whether to display the far site's name when the call connects and how
long to leave the name on the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
User's Guide for Polycom HDX Room Systems
to enable the option.
37