© Polycom, Inc. 2002
Figure 7-7. Available Presentations Screen
2.
Select your presentation and press the SELECT button on the
remote control to begin presenting. A presentation password
may be required to proceed (this is the password set previously
in the pcPresent screen).
Figure 7-8. Presentation Password Screen
3.
The Presentation Directory screen appears where you can
observe slides being loaded onto the ViewStation FX or VS4000.
4.
A thumbnail of each loaded slide appears on the Presentation
Directory screen so that you can see all of the slides at once. Use
the arrow buttons on the remote control to highlight a slide, and
then press the SELECT button on the remote control to view it.
Chapter 7 - Using the System with a PC
265