Allowing The Far Site To Control Your Camera; Displaying The Far Site's Name When The Call Connects; Hearing Audio Confirmation When You Dial - Polycom QDX 6000 User Manual

User's Guide for Polycom QDX 6000 Systems

Allowing the Far Site to Control Your Camera

1
2
3
4

Displaying the Far Site's Name When the Call Connects

1
2
3
4
5

Hearing Audio Confirmation When You Dial

18
Depending on your system configuration, you can allow the far site to
control your camera. Far-site participants can also set and use presets for
your camera, if their system supports this.
To allow the far site to control your camera:
Select System from the Place a Call screen.
Select User Settings from the System screen.
Scroll to Far Control of Near Camera and press
option.
Press Home to save your change and return to the home screen.
Changing this setting takes effect immediately, even if a call is in progress.
Depending on your system configuration, you can specify whether to
display the far site's name when the call connects.
To specify whether to display the name of the far site:
Select System from the Place a Call screen.
Select User Settings from the System screen.
Select Next to see more settings.
Scroll to Far Site Name Display, press
select whether to display the remote site name.
Press Home to save your change and return to the home screen.
Depending on your system configuration, you can set up the system to speak
each number as you enter it in the dialing entry field on the Place a Call
screen.
to enable the
on the remote control, and
© Polycom, Inc.