Analog Telephone Calls; Placing A Telephone Call; Figure 5-7.Telephone Screen - Polycom ViewStation FX4000 User Manual

ViewStation FX/VS4000 User Guide

Analog Telephone Calls

Placing a Telephone Call

190
In countries where it is approved, you can connect an analog telephone
line to your ViewStation FX or your VS4000. This lets you make
telephone calls through the ViewStation FX or the VS4000 and
include audio third parties in your video calls.
You can use your ViewStation FX or your VS4000 as a standard
speakerphone.
To place a telephone call from your ViewStation FX or VS4000:
1. From the main calling screen, select Telephone and press the
SELECT button. The Telephone screen appears.
Figure 5-7. Telephone Screen
2. Use the numeric keypad on the remote control to enter the
number you want to dial.
If you are dialing within your PBX system, you only have to dial
the last four digits of the number.
If you want to delete a digit, press the LEFT ARROW button on
the remote control.
To delete an entire phone number, highlight the Clear icon on
the screen and press the SELECT button on the remote control.
www.polycom.com