Showstation Ip - Polycom ViewStation FX4000 User Manual

ShowStation IP

© Polycom, Inc. 2002
Limitations
If the far site cannot support dual streams, the ViewStation FX or the
VS4000 reverts to sending the live computer screen as the main
video stream.
For more information about installing Visual Concert FX, consult
Visual Concert FX User Guide and Visual Concert FX QuickStart.
®
The ShowStation IP allows you to project any type of document or
Microsoft Office file in big-screen format and share it with any
location instantly.
The ShowStation IP works best when you have two ViewStation FX
or VS4000 systems, two ShowStations with LAN cards, and an RJ-45
cable. For information about installing ShowStation IP refer to the
ShowStation User Guide.
To connect and use the ShowStation IP:
1. Use the provided blue RJ-45 cable to connect the ShowStation
LAN card to the blue LAN port on the back of the ViewStation
FX or VS4000. You can also connect the ShowStation and
ViewStation FX or the VS4000 to the same LAN.
2. Find the LAN name of the ShowStation. Click the Toolbar icon
on the main menu of the ShowStation. The Site Name is under
the Preferences tab.
Power on the ViewStation FX or VS4000.
3.
4. Select System Info>Admin Setup>Data Conference and enter
the name of the ShowStation on the Data Conference screen.
Place a video call between the two ViewStation FX systems or
5.
the VS4000 systems . When the ViewStation FX or VS4000
systems connect, the ShowStations synchronize with one
another automatically.
Chapter 2 - Installing the ViewStation FX/VS4000
Note
63