Table of Contents
Advertisement
Pairing a New Remote
Plug the LEDs in.
1.
Ensure a battery (CR2032) is installed in the remote.
The LED on the remote will illuminate when any button is
touched.
2.
On the LED receiver (shown below) touch the remote
pairing button.
3.
On the remote, touch the On/Off key until the LEDs turn
on and off. The new remote is now paired.
56
LED REMOTE OPERATING INSTRUCTIONS
Mode
Color Wheel
Bright -
Indicator Light
Remote Pairing Button
Speed/Saturation
Turning the LEDs on
Press the On/Off button to turn the LEDs on.
Note: If the remote is left inactive for more than 1 minute, the
remote will turn off but the LEDs will remain on. Push any button to
turn the remote on.
Scene
On/O
Bright +
R/G/B/W+/-
Advertisement
Table of Contents
