Multifunction Remote Operating Instructions - Empire Comfort Systems DVCT40CSP95N-1 Installation Instructions Manual

Direct-vent zero clearance gas fireplace heater
Hide thumbs Also See for DVCT40CSP95N-1:
Table of Contents

Advertisement

MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS

TECHNICAL DATA
Remote Control
Supply voltage
Ambient temperature ratings
Radio frequency
The transmitter and receiver are radio frequency devices.
Placing the receiver in or near metal may severely reduce
the signal range.
Turn "off" the main gas supply and electrical supply to the
appliance during installation and/or maintenance of the
receiver device.
FIRE HAZARD. CAN CAUSE SEVERE INJURY OR DEATH.
The Receiver causes ignition of the appliance. The appliance
can turn on suddenly. Keep away from the appliance burner
when operating the remote system or activating manual
bypass of the remote system.
PROPERTY DAMAGE HAZARD.
EXCESSIVE HEAT CAN CAUSE PROPERTY DAMAGE.
The appliance can stay lit for many hours. Turn off the
appliance if it is not going to be attended for any length of
time. Always place the Transmitter where children can not
reach it.
40651-2-0320
4.5 V (three 1.5 V AAA batteries)
0-50°C (32 - 122°F)
315 MHz
WARNING
WARNING
WARNING
CAUTION
Figure 56
NOTE: This control system includes a Battery Back-up pack that
allows the Fireplace to operate in the event of a power outage.
NOTE: The Accent Light and/or Blower features will not operate
during a power outage.
NOTE: Replace all Batteries at least once each year, preferably
before at the beginning of the season.
FIRE OR EXPLOSION HAZARD.
Can cause property damage, sever injury or death. Do not
attempt to take apart the gas control or to clean it. Improper
assembly and cleaning can cause unreliable operation.
Figure 57
CAUTION
Page 31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvct40csp95p-1

Table of Contents