Empire Comfort Systems DVLXG75BP90N-1 Installer's Manual page 46

LOG PLACEMENT (CONT'D)
Before placing the logs and embers, remove the infill by
unscrewing the 4 screws that secure it.
Fold all the log locating tabs up 90° as seen in the images below.
Fold ALL tabs 90°
Place all logs as shown in the three steps on the next page. Place
the embers around the logs in a single layer.
Ensure that the embers cover the entire infill and all the burners.
Notice: Do not place embers in the pilot recessed area.
Place the embers over the secondary infill that sits between the
two panes of glass as well.
46