Empire Comfort Systems DVLXG75BP90N-1 Installer's Manual page 54

Continuous Pilot/Intermittent Pilot (CPI/IPI) Selection
With the system in OFF position press the Mode Button to index
to the IPI mode icon. Pressing the down arrow button will return
to IPI if CPI is selected. A single beep will confirm the reception
of the command.
Ensure that the fireplace is set to IPI mode.
This appliance will only function on the IPI setting. Ensure IPI is
selected before operation of the fireplace will not operate.
54
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
WARNING
Button Lock
This function will lock the Buttons to avoid unsupervised
Room Temperature
operation.
To activate this function, press the MODE and UP Buttons at
the same time.
To deactivate this function, press the MODE and UP Buttons
at the same time.
Set Temperature
Low Battery Power Detection - Transmitter
The life span of the remote control batteries depends on various
factors:
• Quality of the batteries
• How frequently the fireplace cycles on and off
When the transmitter batteries are low, an Icon will appear on
the LCD display of the transmitter, as shown below. When the
batteries are replaced this icon will disappear.