Omron SYSDRIVE 3G3EV User Manual page 51

Preparing for Operation
D Setting Constants Using the PRGM Indicator
Example:
Changing the value of constant no. 02 (operation mode selection) to "3."
Key Indicator
operation
n01
Note 1. If the new data is not to be registered, press the Mode Key instead of the Enter
Key. The new data becomes invalid and the constant no. display ("n02") is re-
turned.
Note 2. Holding down the Increment Key or Decrement Key changes data quickly.
H List of Constants
Constant Dedicated
no. indicator
n01
n02
n03
n04
Example of
data display
n01
Press the Mode Key until the PRGM indicator
lights up.
n02
Press the Increment Key. "n02" appears in the
data display section.
0
Press the Enter Key. The value of constant no. 02
is displayed.
Flashing Change the value to "3" by pressing the Increment
3
Key. The data display section flashes (indicating
that the value is yet to be registered).
3
Press the Enter Key. The data display section
stops flashing.
n02
After approximately 0.5 second, the data display
section returns to the constant no. display ("n02").
n02 0
Description
Constant write-inhibit selec-
tion/constant initialization
Operation mode selection
Interruption mode selection
Forward/reverse rotation
selection
Explanation
Flashing
3 3
Setting range
0, 1, 8, 9
0 to 5
0, 1
For, rEv
Chapter 4
n02
(After 0.5
second)
Factory setting
1
0
0
For
4-9