Omron SYSDRIVE 3G3EV User Manual page 118

Appendix A
Constant Indi-
no. cators
n43
n44
n45
n46
n47
n48
n49
n50
n51
n52
7-14
Description
Frequency 0: Frequency reference
reference input
1: Fault reset
terminal
Multi-function 0: Output frequency
analog output
1: Output current
Multi-function 0.00 to 2.00
analog output
gain
DC control 0 to 100 (%)
current
Interruption DC 0.0 to 5.0 (seconds)
control time
Startup DC 0.0 to 5.0 (seconds)
control time
S-shape
0: No s-shape acceleration or
acceleration and
deceleration
1: S-shape characteristic time set to 0.2
characteristic
2: S-shape characteristic time set to 0.5
3: S-shape characteristic time set to 1.0
Over-torque 0: Inverter does not monitor over-torque.
detection
1: Inverter monitors over-torque only
function
selection
2: Inverter monitors over-torque only
3: Inverter always monitors over-torque
4: Inverter always monitors over-torque
Over-torque 30 to 200 (%)
detection level
Over-torque 0.1 to 10.0 (seconds)
detection time
Setting range
deceleration
second
second
second
when speed is matched. It continues
operation even when over-torque is
detected.
when speed is matched. It
discontinues operation when
over-torque is detected.
during operation. It continues
operation even when over-torque is
detected.
during operation. It discontinues
operation when over-torque is
detected.
Chapter 7
Setting
[0.30]
[50]
[0.5]
[0.0]
[160]
[0.1]