Table of Contents
Advertisement
Appendix B Frequently Asked Questions
I can't perform an IR HotSync
operation.
When I press the HotSync
button on the cradle/cable,
nothing happens on Palm
Desktop software, and my
handheld times out.
400
Try each of these in turn:
On a computer running Windows 98, be sure that the
HotSync Manager is running, that Infrared is selected on
the HotSync Manager menu, and that the Serial Port for
local operations is set to the simulated port for infrared
communication. See
in
Chapter 17
for details.
On a computer running Windows 2000/ME/XP, select IR
in the HotSync Manager. See
infrared communication"
On a Mac computer, make sure the infrared
communications extensions have been installed in the
Extensions folder inside the System folder. Next, open the
HotSync Software Setup window, and be sure that HotSync
Manager is enabled and that the Local Setup Port is set to
Infrared Port. See
Chapter 17
for more information.
On your handheld, be sure the HotSync application is set to
Local, with the option IR to PC/Handheld.
Be sure the IR port of your handheld is aligned directly
opposite to, and within a few inches of, the infrared device
of your computer.
IR HotSync operations do not work after you receive a low
battery warning. Check the battery power of your
handheld. Recharge the internal battery.
Try each of these in turn:
Make a copy of your Palm folder. Uninstall, and then
reinstall, Palm Desktop software.
Turn on your handheld and press Home
HotSync icon
, and then tap Local.
"Conducting IR HotSync operations"
"Preparing your computer for
in
Chapter 17
"Conducting IR HotSync operations"
for details.
in
. Tap the
Advertisement
Table of Contents
