Table of Contents
Advertisement
Transmits specific characters to the TCP/IP server to which you
Send
are connecting.
Transmits a carriage return or LF character to the TCP/IP server
Send CR
to which you are connecting.
Transmits the user ID information entered in the User ID field of
Send User ID
the Network Preferences screen.
Transmits the password entered in the Password field of the
Send
Password
Network Preferences screen. If you did not enter a password,
this command prompts you to enter one. The Password
command is usually followed by a Send CR command.
Tells your handheld to wait a specific number of seconds before
Delay
executing the next command in the login script.
Reads an IP address and uses it as the IP address for your
Get IP
handheld. This command is used with SLIP connections.
Opens a dialog box and prompts you to enter text of some kind
Prompt
(for example, a password or a security code).
Identifies the last line in the login script.
End
Repeat steps 2 and 3 until the login script is complete.
4.
Press Function
5.
Plug-in applications
You can create plug-in applications containing script commands that extend the
functionality of the built-in script commands. A plug-in application is a standard
PRC application that you install on your handheld just like any other application.
After you install the plug-in application, you can use the new script commands in
a login script.
Plug-in applications have the following characteristics:
Written in C language
Compiled into a device executable
Called properly from a login script
Able to return control to a login script after it terminates
Created using a development environment that supports Palm OS
such as Metrowerks CodeWarrior for Palm Platform.
For additional information on creating plug-in applications, send e-mail to
Palm Developer Support at
+ Enter
or tap OK.
,
devsupp@palm.com
Setting Communication Preferences
.
®
software,
349
Advertisement
Table of Contents
