Table of Contents
Advertisement
Chapter 14 Using Palm™ VersaMail™ Personal E-mail Software
Setting advanced outgoing mail options
You can set additional outgoing mail options.
To set advanced outgoing mail options:
(Optional) Select either of the following:
1.
Port Number
Authentication
Tap Done, or press Function
2.
Configuring your synchronize-only account
After you finish setting up a synchronize-only e-mail account, you need to
configure this account on your desktop. See
Manager"
e-mail between your handheld and your desktop until you configure the account
on your desktop.
162
The default is 25, the port number most SMTP servers use. If
you are not sure about the correct port number, check with
your mail server administrator.
Select the My server requires authentication (ESMTP) check
box if the outgoing server (SMTP) requires authentication.
Check with your system administrator before selecting this
option. See
chapter for information. If you select this option, username
and password fields appear. These fields are already filled in
based on the account information you entered previously. In
most cases, the information displayed is correct; however,
occasionally your authentication username and/or
password is different from your account username or
password. Check with your e-mail service provider for
authentication username and password information.
If you need to enter new information, enter a username
and/or tap the Password box and enter a password, and
then tap OK.
Username and Password fields appear only if
ESMTP check box is selected
later in this chapter for information. You will not be able to synchronize
"Adding ESMTP to an account"
+ Enter
.
"Configuring an account in HotSync
later in this
Advertisement
Table of Contents
