Palm Tungsten Tungsten C Handbook page 241

Mail Client Action
Direct POP Select this option to synchronize an account by connecting
connection to directly with a POP server. You must enter the information about
server the server in the VersaMail application on your handheld when
you create the e-mail account to access the server. You will enter
information about the incoming (POP) server, the outgoing
(SMTP) server, your e-mail username, your password, and your
e-mail address. You can change these settings under Handheld
Settings in the conduit; see the procedure for setting handheld
synchronization settings later in this chapter.
During the HotSync operation, the conduit reads the settings you
made. If the settings do not exist or all server information is
wrong, an error is reported in the HotSync.log file. However, if the
incoming server (POP) is correct, the Inbox is synchronized if the
option to synchronize the Inbox is selected. If the outgoing server
(SMTP) is correct, the Outbox is synchronized (send e-mail) if you
selected the option to synchronize the Outbox. If neither is correct,
then nothing happens.
If you want to synchronize e-mail for an account that requires
APOP authentication, you must select the option to use APOP on
your handheld.
for details.
If you want to synchronize e-mail for an account that requires
ESMTP authentication (for example, Yahoo accounts require
ESMTP authentication), you must select the option to use ESMTP
on your handheld.
chapter for details.
The conduit does not support SSL for accounts set up as direct
POP .
Synchronizing e-mail between the handheld and the desktop
"Adding APOP to an account"
"Adding ESMTP to an account"
later in this chapter
later in this
229