Table of Contents
Advertisement
The printer does not print correctly in the
PostScript mode
Cause
The printer's emulation mode
setting is incorrect.
The printer's emulation mode
setting for the interface that you are
using is incorrect.
The printer does not print
Cause
The Print to file check box is
selected in the Print dialog box
(except on Mac OS X).
The Save as File check box is
selected on the Output Option
sheet in the Print dialog box (Mac
OS X only).
What to do
The printer is set to the Auto mode by
default, so that it can automatically
determine the encoding used in the
received print job data and select the
appropriate emulation mode. However,
there are situations where the printer
cannot select the correct emulation
mode. In this case, it must be set manually
to PS3.
Set the emulation mode through the
SelecType Emulation menu on the printer.
See "Emulation Menu" on page 221.
The emulation mode can be set
individually for each interface which
receives print job data. Set the emulation
mode for the interface you are using to
PS3.
Set the emulation mode through the
SelecType Emulation menu on the printer.
See "Emulation Menu" on page 221.
What to do
Clear the Print to file check box in the Print
dialog box.
Clear the Save as File check box on the
Output Option sheet in the Print dialog box.
Troubleshooting
11
11
11
11
11
11
11
11
11
11
11
11
401
Advertisement
Table of Contents
