Epson AcuLaser C4200DN User Manual page 258

Workgroup colour printer
Hide thumbs Also See for AcuLaser C4200DN:
Table of Contents

Advertisement

The installed toner cartridge is not an genuine Epson toner
cartridge. The printout and remaining amount of each toner
cartridge displayed on the control panel may be different from
those when using genuine EPSON toner cartridges. Epson shall
not be liable for any damages or problems arising from the use of
consumable products not manufactured or approved by Epson.
Installing a genuine toner cartridge is recommended. Press the
N Start/Stop button on the control panel to resume printing.
Offline
The printer is not ready to print. Press the N Start/Stop button.
In this mode, the remaining amount of the toner cartridge for each
color is displayed in seven levels.
Optional RAM Error
The optional memory module may be corrupted or incorrect.
Replace it with a new one.
Paper Out tttt sssss
There is no paper in the specified paper source (tttt). Load paper
of the size (sssss) into the paper source.
Paper Set tttt sssss
The paper loaded in the specified paper source (tttt) does not
match the required paper size (sssss). Replace the loaded paper
with the correct size paper and press the N Start/Stop button to
resume printing, or press the + Cancel Job button to cancel the
print job.
If you press the N Start/Stop button without replacing the paper,
the printer will print on the loaded paper even though it does not
match the required size.
Printer Open
258
Using the Control Panel

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser c4200dnpc6Aculaser c4200dtnpc6

Table of Contents