Table of Contents
Advertisement
The printer is ready to receive data and print.
In this mode, the remaining amount of the toner cartridge for each
color is displayed in seven levels.
Replace Photoconductor
The photoconductor has reached the end of its service life. Turn
off the printer, then replace the photoconductor unit with a new
one. See "Photoconductor Unit" on page 318 for instructions.
The error clears automatically after you replace the unit, then
close all printer covers. The photoconductor service life counter
is reset automatically.
When the error light is blinking, you can continue printing by
pressing the N Start/Stop button. However, the print quality is
not guaranteed from then on.
Replace Toner uuuu
The indicated toner cartridges are out of toner and need to be
replaced. (The letters C, M, Y, or K appear in place of uuuu and
indicate the colors Cyan, Magenta, Yellow, and Black
respectively.)
See "Toner Cartridge" on page 312 for instructions.
Replace Transfer Unit
The transfer unit has reached the end of its service life. Turn off
the printer, then replace the transfer unit with a new one. See
"Transfer Unit" on page 330 for instructions.
The error clears automatically after you replace the unit and close
all printer covers. The transfer unit service life counter is reset
automatically.
Reserve JobCanceled
260
Using the Control Panel
Advertisement
Table of Contents
