When Transparencies Are Jammed At The Mp Tray; Printing A Status Sheet - Epson AcuLaser C4200DN User Manual

When transparencies are jammed at the MP tray

When the LCD panel displays the Check Transparency error
message, there may be paper jammed at the MP tray.
Remove the paper from the MP tray and remove any jammed
paper. Open cover A, check that no jammed paper is left inside
the cover, and close the cover to clear the message on the LCD
panel. Then reload the paper. The printer resumes printing from
the page that jammed.
Note:
❏ When using transparencies, load them in the MP tray and set the
Paper Type setting to Transparency in the printer driver.
❏ When the Paper Type setting in the printer driver is set to
Transparency, do not load any other type of paper except
transparencies.

Printing a Status Sheet

To confirm the current status of the printer, and that the options
are installed correctly, print a status sheet using the printer's
control panel or the printer driver.
To print a status sheet from the printer's control panel, see
"Printing a Status Sheet" on page 267.
To print a status sheet from the printer driver, for Windows, see
"Printing a status sheet" on page 95, or for Macintosh, see "Printing
a status sheet" on page 167.
Troubleshooting
11
11
11
11
11
11
11
11
N e w : u s e c a u t i o n w i t h t h e i c o n o r b u t t o n
11
11
11
11
377