Table of Contents
Advertisement
Specifies the language displayed on the LCD panel and that
printed on the status sheet.
Time to Sleep
Specifies the length of time until the printer enters the sleep mode
if there are no button operations.
Time Out
Specifies the length of the time, in seconds, before a time out when
interfaces are being switched automatically. The time before a
time out occurs is the length of time from the point when no data
is being received from an interface until the point of switching the
interface. If the printer has a print job when switching the
interface, the printer prints the print job.
Paper Source
Specifies whether paper feeds into the printer from the MP tray
or the optional lower paper cassette unit.
If you select Auto, paper feeds from the paper source containing
paper that matches your Paper Size setting.
If an envelope size (DL, IB5) is selected as the Page Size setting,
paper always feeds from the MP tray. If you select Thick,
ExtraThk, or Trnsprnc as the Paper Type setting, paper always
feeds from the MP tray.
MP Mode
This setting determines whether the MP tray has the highest or
lowest priority when Auto is selected as the Paper Source setting
in the printer driver. When Normal is selected as the MP Mode,
the MP tray has the highest priority as the paper source. If you
select Last, the MP tray has the lowest priority.
Manual Feed
226
Using the Control Panel
Advertisement
Table of Contents
