Thick Paper And Extra Thick Paper; Loading A Custom Paper Size - Epson AcuLaser C4200DN User Manual

Thick paper and extra thick paper

You can load thick paper (106 to 163 g/m²) or extra thick paper
(164 to 216 g/m²) into the MP tray.
When loading thick or extra thick paper, you should make paper
settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Paper Size:
Paper Source: MP Tray (up to 15 mm thick stack)
Paper Type:
Note:
When using extra thick paper, you cannot do duplex printing
automatically. When you want to do duplex printing with extra
thick paper, set the Paper Type setting on printer driver to Extra
Thick (Back), then do the duplex printing manually.
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 219.

Loading a custom paper size

You can load non-standard size paper (88.9 × 139.7 mm to 220 ×
355.6 mm) into the MP tray.
When loading a custom paper size, you should make paper
settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Paper Size:
A4, A5, B5, LT, HLT, EXE, GLT
Thick or Extra Thick
User Defined Size
Paper Handling
3
N e w : w i t h c o n t r o l p a n e l / i n c l u d i n g t h e i n f o r m a t i o n a b o u t d u p l e x p r i n t i n g / I f u n n e c e s s a r y , d e l e t e n o t e t e x t
3
3
3
3
3
3
3
3
N e w : w i t h c o n t r o l p a n e l / i n c l u d i n g t h e i n f o r m a t i o n a b o u t M a c
3
3
3
59