Table of Contents
Advertisement
To clear the jam, see "Paper Jam C A B" on page 376.
Check Paper Size
The paper size setting is different from the size of paper loaded
in the printer. Check to see if the correct size of paper is loaded in
the specified paper source.
To clear this error, select Clear Warning from the control panel's
Reset Menu. See "How to access the control panel menus" on page
214 for instructions.
Check Paper Type
The paper loaded in the printer does not match the paper type
setting in the printer driver. Paper that matches only the paper
size setting will be used for printing.
To clear this error, select Clear Warning from the control panel's
Reset Menu. See "How to access the control panel menus" on page
214 for instructions.
Clean Sensor
Open cover A and remove the transfer unit temporarily. Wipe the
transparent plastic window on the density sensor at the back of
the transfer unit with a soft cloth, then reinstall the transfer unit.
Close cover A to clear this error.
If the error still remains, replace the transfer unit with a new one.
Collate Disabled
Printing by specifying the number of copies is no longer possible
due to a lack of memory (RAM) or free disk space on the optional
Hard Disk Drive. If this error occurs, print only one copy at a time.
250
Using the Control Panel
Advertisement
Table of Contents
