Table of Contents
Advertisement
w
c
6. Reinstall the photoconductor unit, making sure the posts on
the sides of the unit slide into the slots.
w
360
Troubleshooting
Warning:
Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
may be very hot.
Caution:
Do not touch the rollers inside the printer.
Warning:
Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
may be very hot.
Advertisement
Table of Contents
