Paper Source: MP Tray (up to 150 sheets or up to 15
Paper Type:
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 219.
EPSON Color Laser Transparencies
Epson recommends the use of EPSON Color Laser
Transparencies.
Note:
Duplex printing is not available for transparencies.
Transparencies can be loaded into the MP tray only. When using
transparencies, you should make paper settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Paper Size:
Paper Source: MP Tray (up to 15 mm thick stack)
Paper Type:
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 219.
54
Paper Handling
A4
mm thick stack)
Lower Cassette (up to 550 sheets or
up to 61 mm thick stack in each
cassette)
Semi-Thick
A4 or LT
Transparency
N e w : C o l o r o n l y / w i t h c o n t r o l p a n e l / i n c l u d i n g t h e i n f o r m a t i o n a b o u t d u p l e x p r i n t i n g / q u o t e t h e i n f o r m a t i o n f r o m s i m i l a r p r o d u c t ( h o w t o l o a d t r a n s p a r e n c i e s )