Using Hdd Form Overlay - Epson AcuLaser C4200DN User Manual

Different printer settings overlay data
The overlay data is made with the current printer settings (such
as Orientation: Portrait). If you want to make the same overlay
with different printer settings (such as Landscape), follow the
instructions below.
1. Re-access the printer driver as described in step 2 in "Creating
an overlay" on page 81.
2. Make the printer settings and exit the printer driver.
3. Send the same data that you made by application to the
printer like step 12 in "Creating an overlay" on page 81.
This setting is available only for Form Name data.

Using HDD form overlay

This function enables faster printing with form overlay data.
Windows users can use the form data registered on the optional
Hard Disk Drive installed in the printer though only an
administrator can register or delete the form data on the Hard
Disk Drive. You can access this function from the Form Selection
dialog box in the printer driver.
Note:
❏ This function is not available if the optional Hard Disk Drive is not
installed.
❏ When the document's resolution, paper size or paper orientation
settings are different from the form overlay data that you use, you
cannot print the document with the form overlay data.
❏ This function is available in the High Quality (Printer) mode.
Using the Printer Software with Windows
4
4
4
4
4
4
N e w : U s i n g H D D i s a v a i l a b l e 4
4
4
4
4
4
87