Table of Contents
Advertisement
Selecting the printer
After installing the PostScript 3 printer driver, you need to select
the printer.
Selecting the printer when it is connected via a USB
connection for Mac OS 9 users
If the printer is connected to your computer via a USB port, you
will not be able to select the printer from the Chooser. You will
have to launch the Apple Desktop Printer Utility, then register the
printer as a Desktop Printer. The Desktop Printer Utility is
automatically installed when you install the Adobe PostScript
printer driver. Follow the steps below to select the printer and to
create a Desktop Printer.
Note:
When printing via the USB port from a Power Macintosh running Mac
0S 9, the printer must be set to handle ASCII data. To specify this setting,
select Print from the File menu of the application that you are using, then
select the name of the application from the options available in the Print
dialog box. On the setup option page that appears, select ASCII for the
data format setting. The actual setting name varies by application, but
is often called Encoding or Data.
1. Open the AdobePS Components folder in your hard disk,
then double-click the Desktop Printer Utility.
2. The New Desktop Printer dialog box appears. Select
AdobePS from the With pop-up menu, click Printer (USB) in
the Create Desktop list, then click OK.
3. Click Change in USB Printer Selection.
4. The USB Printer dialog box appears. Select your printer from
the list of connected USB printers, then click OK.
Using the PostScript Printer Driver
6
6
6
6
6
6
6
6
6
6
6
6
207
Advertisement
Table of Contents
