Table of Contents
Advertisement
Network Configuration Worksheets
TASK 3: Assign an IP Address to the Backplane (s1b)
A-6
On the IP Network screen, assign an IP address to the backplane (s1b).
NOTE:
You will need to create a separate and distinct network or subnetwork for the
8546 DSL cards and 5446 RTUs, or for 8540 DSL cards. However, the RTUs
associated with the 8540 DSL cards do not need to be included in the
network.
Access the . . .
IP Network screen
IP Network Screen
Prompt
1. Enter the interface name at the Input
Interface Name: prompt.
2. Enter the base IP address at the
(nnn.nnn.nnn.nnn): prompt.
3. Enter the base subnet mask at the
(nnn.nnn.nnn.nnn): prompt.
4. Enter the peer IP address at the
(nnn.nnn.nnn.nnn)or
address-pool: prompt.
5. Enter route type NET (for network) at
the Route to peer (host/net):
prompt.
November 1997
By . . .
Selecting Configuration
Interfaces
from the HotWire – MCC menu.
Your Configuration Setting
IP Interface = s1b
Base IP Addr =
Base Subnet Mask =
Peer IP Address =
Route to Peer= NET
IP Network
A-C-B
8000-A2-GB21-20
Advertisement
Table of Contents
